Types of Sweaters for Your Knitwear Line
Pullover sweaters for a knitwear line come in 18 types, and 14 of them are seasonal styles that you order months before they sell. Cabled turtlenecks for December go on the knitting machines in late spring. If the shape or stitch changes after the first sample, another sample with a new knitting program takes one to two weeks.
Sweater gauges
When a quote says 12gg, the sweater is knitted on a machine with 12 needles to the inch. Flat knitting machines cover 3 to 18 gauge. Fewer needles to the inch mean thicker yarn and a chunkier sweater for colder weather.
| Gauge (gg) | Needle spacing | Feel | Season |
|---|---|---|---|
| 3 | 8.5 mm (1/3 in) | Very chunky | Fall and winter |
| 5 | 5.1 mm (1/5 in) | Chunky | Fall and winter |
| 7 | 3.6 mm (1/7 in) | Midweight | Fall and winter |
| 9 to 10 | 2.8 to 2.5 mm (1/9 to 1/10 in) | Midweight | Fall and winter |
| 12 | 2.1 mm (1/12 in) | Light | All year |
| 14 | 1.8 mm (1/14 in) | Light | Spring and summer |
| 16 to 18 | 1.6 to 1.4 mm (1/16 to 1/18 in) | Very light, almost sheer | Spring and summer |
| 30 on older fully fashioned machines, counted per 1.5 in | 1.3 mm (1/20 in) | Very light, smooth | All year |
Plain men's sweaters in size M weigh 600 to 750 g (21 to 26 oz) on 5 gauge and 200 to 280 g (7 to 10 oz) on 14 gauge. The 5-gauge sweater takes nearly three times the yarn, and couriers who bill by the kilo charge more for its heavier parcel. Fine gauges take longer on the machine. The 14-gauge front of a sweater 50 cm (20 in) wide has 276 stitches to a row against 98 on 5 gauge and many more rows from hem to shoulder. Prices for 14-gauge sweaters sit above 7-gauge prices at any level of the market.
Sweater yarns
Worsted merino and two-ply cotton keep a clean surface longest on sweaters that are washed weekly. The long fibers in worsted yarn are combed parallel before they are twisted into a tight strand that pills far less than airy woolen-spun yarn. Merino with a little nylon blended in wears more slowly at the elbows and cuffs. Untreated wool felts in the machine. Superwash merino costs more per kilo for the treatment that stops it felting. Cotton, acrylic and superwash merino suit customers who put their sweaters in the washing machine.
| Yarn | Types it suits | What to watch | Price | US duty when it is the largest fiber group |
|---|---|---|---|---|
| Merino wool | Crewnecks, V-necks, high-neck sweaters, knitted tees | Price rises as the fiber gets thinner and moves with the wool market | Mid | 16% |
| Lambswool | Fair Isle sweaters, fall crewnecks | Can itch at the neck | Mid | 16% |
| Cashmere | Crewnecks, turtlenecks, vests | Low-priced grades use short fibers that pill early | High, several times merino per kilo | 4% if wholly cashmere, otherwise 16% |
| Cotton | Bretons, openwork tops, thermal Henleys, garment-dyed sweaters | Heavier than wool, little stretch, rib trims need an elastic yarn knitted in | Low to mid | 16.5%, or 5% with at least 36% linen |
| Linen blends | Knitted tees and polos for high summer | Stiff at first, softens with washing | Mid | 6% when linen is the largest fiber |
| Viscose blends | Cowls, pointelle tops, sweater dresses | Weak when wet, can stretch out of shape | Low to mid | 32%, or 17% with at least 23% wool, cashmere, alpaca or mohair, or 6.3% with at least 30% silk |
| Acrylic | Christmas sweaters, staff uniforms | Pills easily, static in dry weather | Low | 32%, or 17% with at least 23% wool, cashmere, alpaca or mohair, or 6.3% with at least 30% silk |
| Polyester | Uniform blends, recycled ranges | Less breathable than natural fibers | Low | 32%, or 17% with at least 23% wool, cashmere, alpaca or mohair, or 6.3% with at least 30% silk |
| Mohair | Chunky and oversized sweaters | Usually spun with nylon or wool for strength, sheds a little | Mid to high | 16% |
| Alpaca | Chunky sweaters | Heavy knits grow longer in wear | Mid to high | 16% |
US customs sorts the fibers in a sweater into groups before it picks a rate: wool together with fine animal hair such as cashmere, alpaca and mohair; acrylic, polyester, nylon and viscose as man-made fiber; and cotton, linen and silk as separate groups. The rate follows the heaviest group. Sweaters of 50% merino, 30% cashmere and 20% nylon fall in the wool group at 16%. Cotton is the largest single fiber in a sweater of 40% cotton, 30% acrylic and 30% polyester, yet customs counts the acrylic and polyester together as 60% man-made fiber and classes the whole sweater as man-made. Its duty of 32% is almost twice the cotton rate. Ties between man-made fiber and another group go to man-made fiber. The duty on an acrylic blend with 20% wool drops from 32% to 17% once the wool goes up to 23%. You have to decide on a blend that qualifies for a lower rate before you order the yarn. Customs labs can test the fiber content. Extra tariffs that depend on where a sweater was made are added to these rates and change far more often.
You can put recycled, organic and animal-welfare claims on your label once the yarn is certified from its source through to the finished sweater: GRS or RCS for recycled fiber, GOTS or OCS for organic cotton and RWS for wool from farms audited for animal welfare. You will also pay more per kilo for organic cotton and RWS wool than for conventional yarn. Recycled wool and cashmere are spun from old knits that are sorted by color and shredded back into fiber. Most of them contain some new wool or nylon that goes on your label next to the recycled fiber. The mixed shades of the sorted knits stay in recycled yarn unless it is overdyed darker.
Black, navy, heather gray and oatmeal are stock shades that most spinners keep on the shelf. They can be reordered in small amounts whenever a sweater sells out. It takes a few hundred sweaters in one color to use up the 100 to 200 kg (220 to 440 lb) that spinners usually want for a custom brand shade unless you pay more per kilo for a smaller batch. One batch can be shared by several styles that all come out in matching color. The dyeing takes 5 to 15 days after the color of a dyed swatch is approved, and the first sample can be knitted in a stock shade in the meantime. Reorders come from a new batch that varies slightly in color from the first.

Heathered and marled basics hide the lint and marks that show on solid colors. Because heathered yarn is spun from fiber already dyed in several shades, a custom heather takes longer to develop than a custom solid shade. The spinner can make a marl right away by twisting two stock yarns of different colors together. Space-dyed yarn changes color at short intervals along the strand and knits up into dashes of color that fall in a random pattern. Customers who order from a product photo will find the dashes in other places on the sweater they receive.

Types of sweaters for year-round basics
Crewnecks
Your first sweater is often a plain crewneck in 12-gauge merino that sells to men and women in any season. It has the simplest neckline to develop. The 14-gauge version gets more months of wear in places where winters are mild. Women's versions are knitted to a shorter pattern that is narrower through the shoulder. First orders kept to three colors at most have enough pieces in each color to reach the factory's per-color minimum across a full size range from XS to XL.
In fully fashioned knitting, the machine knits every piece of a crewneck to its final shape and almost none of the yarn is lost to cutting. An operator then joins the pieces loop by loop on a linking machine, and you pay for that slow hand work in a higher price and a longer production time than cut-and-sewn knitwear. The yarn saved is worth that extra cost on wool and cashmere. Acrylic and cotton-blend crewnecks at lower prices are usually made from plain knitted panels that are cut to shape and joined on an overlock machine that wraps the cut edges in thread. You can feel their overlocked seams as ridges on the inside.

V-necks
V-necks added to your line on the crewneck pattern need new knitting programs for only the front and the ribbed band around the neck. Office workers wear merino V-necks over collared shirts. Fine-gauge V-necks usually have a mitered V. Both sides of the band meet at the point in a neat diagonal seam that looks clean on a fine knit.
Cricket sweaters have a sportier crossover V in which one side of the band laps over the other. Clubs that order together can share one cream style with cables down the front that differs only in the stripes in club colors at the V, the cuffs and the hem.
Henleys
Casual Henleys in cotton and merino on 12 and 14 gauge open at the neck with a short placket that is knitted as a separate band with buttonholes and sewn onto the front. The band and the buttons in the yarn color add finishing time that a crewneck does not need.
Thermal Henleys in waffle cotton are worn through the winter as loungewear and base layers. The raised grid of small squares is built from tuck stitches that trap a layer of warm air and use more yarn than a plain knit. Waffle cotton shrinks noticeably in the first wash.
Quarter-zips
Quarter-zips on 12 and 14 gauge make up the bulk of corporate and team orders for knitwear. Companies often order merino for client gifts and cheaper acrylic and cotton blends for staff uniforms that are machine washed week after week. Light nylon coil zips bend with a knitted neck more easily than metal ones. Zip pullers that show the company logo are a common touch on corporate orders. For a school order due on the first day of term, stock-color zips are safer than dyed-to-match ones that arrive later.
Raglan sleeves fit a wider range of shoulders than set-in sleeves on the unisex quarter-zips that teams order in many sizes. Women normally go one or two sizes down in a unisex style sized on men's measurements. There is no shoulder seam on a raglan. You measure the sleeve for the size chart from the center back neck to the cuff.
Team names knitted in small letters are readable only on 12 gauge and finer. Curves and diagonals in a knitted logo come out in small steps that follow the stitch grid. Embroidery adds a step after knitting and a minimum per design that is separate from the sweater order.
Types of sweaters for fall and winter
Chunky sweaters
Chunky 3- to 5-gauge sweaters are worn as an outer layer in the coldest months. Machine knits on 3 gauge come close to the look of a hand knit for a fraction of the labor. Real hand knits take one person several days apiece. They suit small drops better than a core range that you keep reordering. Hand knits in one size made by different people differ slightly in their measurements.
Embroidery stitches sink into the loops of a chunky knit deeply enough to blur fine lettering. Team and club logos on chunky sweaters stay sharp as woven and leather patches.
The fuzzy halo of mohair and alpaca yarn hides cables and other raised stitches on a sweater. Chunky sweaters in those yarns look best in plain knit. Acrylic and wool blends that cost much less than mohair can be brushed after knitting into a similar halo.

Fisherman sweaters
The fisherman sweater that most customers picture is an Aran with columns of cables from hem to shoulder. Cables pull the fabric in so much that a cabled front has to be knitted wider than its final size. It weighs more than a plain front. Cable positions and crossings go on your spec before the factory writes the knitting program. Wool's loft and spring lift cables higher off the surface than cotton does on 3 to 7 gauge. Undyed natural wool for Arans needs no custom dye batch. Merino makes a softer Aran for customers who find traditional Aran wool scratchy.
Fisherman rib gives a sweater a fisherman look at a much lower cost than Aran cables. Its deep ribs take more yarn than jersey. Navy Guernseys have plain bodies, but their five-ply worsted wool is knitted at a tight tension that adds weight and machine time.

High-neck sweaters
A turtleneck's tall folded collar adds a lot of yarn to a winter sweater. The factory needs to know whether the collar height on your spec is folded or unfolded. Mock necks stop at a short doubled collar that uses far less yarn. The loose folds of a cowl hang well in merino, cashmere and silk blends and in wood-based fibers like viscose, modal and lyocell.
Rib pulls in across the width, and slim rib turtlenecks take more stitches and yarn than plain-knit ones. Many of them include a little elastane. Any mistake in the steps between sizes shows on a close fit. Slim turtlenecks therefore get an extra round of samples in all sizes before bulk production. Whole-garment machines knit them in one piece. Seamless turtlenecks are worth their higher price and longer development on slim fits that would show side seams.

Shawl-collar sweaters
Shawl-collar pullovers are mostly knitted in chunky wool on 5 to 7 gauge. The extra cost over a crewneck of similar weight lies mainly in linking on the wide rolled collar as a separate piece after the rest of the sweater is joined. Many varsity sweaters have a shawl collar and a large chenille letter on the chest. Several teams can share one varsity style when the letters are sewn on after knitting.
Knitted hoodies
Knitted hoodies in merino and fine cotton are a dressier alternative to a sweatshirt. The hood is the largest extra piece of knitting that a sweater can have. Lined hoods take twice the yarn. The edge of a single-layer hood curls unless a ribbed band is knitted on. The kangaroo pocket on the front means one more knitted piece and more sewing. The drawcord can be a narrow tube knitted in the body yarn.
Trend silhouettes
The per-color minimum is easy to reach on oversized and boyfriend sweaters that come in a few broad sizes. The dropped shoulder on oversized styles needs no armhole shaping. It is the cheapest roomy cut to knit. Cropped versions of styles you already make differ from them only in body length. Balloon sleeves that puff out below the elbow fit an ordinary armhole. Batwing sleeves need a new body and much more yarn, as they open into an underarm that reaches almost to the waist.
Sweater dresses
Because chunky knits stretch under their own weight at lengths from mid-thigh to below the knee, most sweater dresses for fall and winter come off 7- to 12-gauge machines. Merino dresses stay closer to the length you approved than viscose ones. Ribbed hems and cuffs with a little elastane in them spring back after they are stretched. Knee-length dresses often have short side slits. Hip-length tunics go over leggings and slim trousers as a longer sweater.
Fair Isle sweaters
Fair Isle patterns range from narrow bands of tiny motifs to the large snowflakes and stars that many brands sell as Nordic sweaters. The yarns that a jacquard machine is not using in a row float along the back, and the long floats behind a big snowflake are knitted into a backing that keeps them from catching on fingers and rings. The backing adds most of the weight. Traditional Fair Isle knits use only two colors in any one row. Each extra color in a row adds one more strand along the back. Programs for detailed jacquards take longer to write and can be reused the following year if only the colors change. Either kind of pattern costs much less when it is kept to the yoke below the neckline and the rest of the body and the sleeves are knitted plain at full machine speed.
Christmas sweaters
Orders for Christmas sweaters with reindeer and snowflakes go in months before the few weeks between late November and Christmas when they sell. Reorders placed after the first sales would arrive in time only for the markdowns after Christmas. Size the first order for the whole season. Acrylic yarn in the usual holiday reds, greens and creams ships from spinners' stock without a dyeing wait.
Ugly Christmas sweaters for office parties get hand-sewn pom-poms and bells that add sewing time and cost. One stripe or a small motif of metallic lurex is enough for most party sweaters, as the yarn costs more than ordinary acrylic and feels scratchy against the neck and wrists.
An intarsia reindeer is knitted in blocks of color from separate yarns that leave no floats on the back. The machine knits more slowly with one yarn carrier per block, and the loose ends at the color edges are sewn in by hand. The extra cost is worth paying on a large reindeer that would leave long floats or a heavy backing in jacquard. Children's sizes in a matching family set get the reindeer redrawn with fewer stitches.

Types of sweaters for spring and summer
Breton sweaters
Cotton Bretons with navy and cream stripes and a wide boat neck sell mainly in spring. Every yarn change slows the machine. Bretons at an entry price are best knitted in wide bands. The stripes on a well-made Breton line up across the side seams and where the sleeves are joined. Women's boat necks that sit wide across the collarbone but end a few centimeters inside the shoulder point cover bra straps. An off-the-shoulder neckline is a boat neck pushed past the shoulders and held in place by a thin elastic yarn worked into the rib all the way around.
Openwork tops
Hand-crocheted tops are made in small numbers for the high end of a summer price range. Machine-knitted lace stitches can pass for hand crochet at a lower price and in larger quantities than crocheters can make. The eyelets in a pointelle top are formed on the machine by moving stitches between neighboring needles. That handling adds machine time and cost. Your eyelet pattern stops at a narrow border of solid knitting that the factory leaves along the seams and neckline.
Short-sleeved knits
Short-sleeved knits in cotton and 14-gauge merino are what customers buy once the weather turns warm and the winter sweaters have sold through the shops. Tees in merino can be worn under a jacket at the office. The simplest polo to finish has a knitted Johnny collar over an open V-neck without buttons. Buttoned plackets add a Henley's finishing work. Knitted tees sell for far more than T-shirts cut and sewn from fabric.
Sweater vests
Sweater vests worn over shirts in spring and early fall usually have a V-neck deep enough to show the collar and tie. Vest armholes are cut deeper than sweater armholes so that the shirt sleeve underneath fits through without bunching. An argyle front of diamonds costs far less on a vest than on a full sweater that repeats the pattern on its sleeves. School uniform vests in acrylic and cotton blends can be machine washed with the rest of the uniform.
Garment-dyed sweaters
Garment-dyed cotton sweaters have a soft hand and the uneven color of a piece that has been washed many times. You can pick the colors close to the season and have the undyed sweaters dyed in small batches as finished garments. If you choose pigment dyes for the most washed-out look, the color will keep fading in the customer's machine. Spec measurements are the ones after dyeing. The factory knits the undyed pieces larger by the amount they will shrink. Polyester labels and plastic buttons come out of the dye bath in their original color.
Sources
- U.S. International Trade Commission, Harmonized Tariff Schedule of the United States, Revision 23 (2026): heading 6110; section XI, note 2 and subheading note 2; chapter 51, note 1(b)